Precision Devices PD.CD1.53 - 1.5 inch / 105 Watt Compressoin Driver Speaker Komponen

Merk: PRECISION DEVICES

Hanya Tersisa 8 lagi


Whatsapp admin

Deskripsi

  • Hand built, precision machined aluminium phase plug.
  • Three slot optimised geometry phase plug design enhances frequency response and tonal performance.
  • 72.2 mm aluminium voice coil utilising high temperature kapton former.
  • Pure titanium diaphragm for strength and durability at high SPL offers bright extended output.
  • Integrate with our bass and mid range drivers to provide the ultimate PD sound experience.

 

The PD.CD1.53 is an ideal driver for professional high performance applications that can be used in traditional 2-way systems or as part of a larger multi-way long throw system. The individually precision machined and hand assembled three slot, optimised geometry phase plug design enhances tonal performance while minimising sound wave cancellations throughout the working bandwidth.

 


* Measurement taken on custom horn

1. AES standard practice with high pass filter set at specified lower limiting frequency for two hours.

2. Sensitivity is measured with applied pink noise RMS Voltage set to 2.83V for nominal 8 ohms impedance and measurement taken at 1 metre from mouth of horn. Average SPL taken between 2000 to 10000 Hz .

3. Frequency range is defined as measured frequency-10dB to rated sensitivity.


SPECIFICATIONS
Sound Channel /Throat Size1.5" / 38.1 mm
Voice Coil Diameter2.84" / 72.2 mm
Nominal Impedance4 / 8 / 16 Ω
Power Rating (above 1 KHz) 1105 W (A.E.S.)
Sensitivity (1W - 1m on axis, on horn) 2111 dB
Frequency Range 3500 Hz - 18 kHz
Recommended Xover1600 Hz
Minimum Impedance2.9 kHz - 7.2 Ω
Voice Coil MaterialAluminium
Coil Former MaterialKapton
Flux Density1.8 T/m
Diaphragm MaterialTitanium
Suspension MaterialTitanium
Surround / Edge TerminationProgressive
Phase Plug Design3 Slot
Phase Plug MaterialAluminium
Magnet MaterialCeramic
Connector TypePush Button Spring Terminals

MOUNTING AND SHIPPING INFORMATION
Overall Diameter170 mm
Overal Height67 mm
Fitting4 x 6mm threaded holes @ 180 deg
Mounting PCD101.6 mm
Nett Weight4.98 Kg / 10.98 lb
Shipping Weight5.13 Kg / 11.31 lb

Top