NuQ102-AN
600 Watt 2 Way 10" Full Range Powered Loudspeaker with KLARK TEKNIK DSP Technology and ULTRANET Networking
- 2 way full range powered loudspeaker for portable PA and installation applications
- 600 Watt power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- ULTRANET digital audio networking connects to mixers and other sources
- 10" low frequency driver with low mass voice coil for improved transient response
- Aluminium dome 1" neodymium motor compression driver
- Rotatable converging elliptical waveguide provides 100° H x 60° V dispersion
- Fully featured user interface with LCD display for ease of navigation
Technical Specifications
System
Frequency Response | 55 Hz – 18 kHz ±3 dB 50 Hz – 20 kHz -10 dB |
Nominal Dispersion | 100° H x 60° V @ -6 dB points, rotatable |
Maximum SPL | 122 dB peak |
Crossover Type | Active |
Transducers | 1 x 10" (261.5 mm) LF driver 1 x 1" (25.4 mm) HF compression driver |
Limiter | Independent HF, LF, peak and rms |
Amplifier
Maximum Output Power* | 600 W |
Type | Class-D |
Protection | Short circuit, thermal |
Connectors
Input/link | 1 x Combo Jack/XLR 1 x XLR |
Sensitivity | +4dBu or +14 dBu software switchable |
Input impedance | 40 kO balanced |
Maximum input level | +22 dBu |
Ultranet input/link | 2 x RJ45 |
Mains Supply | Neutrik powerCON 20A† |
Controls
DSP | Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter |
User DSP Functions
Factory EQ Presets | Positioning, Sound mode, FBQ |
Display | LCD 128 x 32, blue, backlit |
Delay | 0 - 300 ms |
Equalisation | High and low shelving EQ 2 x parametric EQ |
Limiter | Zero attack input limiter |
Presets | 20 total presets, 19 user-definable |
Crossover | High Pass L-R 24 dB/oct |
Protection | Lock-out function for all settings |
Ultranet Digital Network
Digital processing |
A/D conversion | 24-bit, 44.1/48kHz sample rate |
Converter type | 24-bit, delta-sigma |
System |
Signal | 16 channels |
Latency | < 0.9 ms |
Frequency response | 20 Hz to 20 kHz (+0 / -3 dB) |
Dynamic range | typical 92 dB |
Cabling |
Cables | Shielded CAT5 |
Cable length | max. 246 ft / 75 m recommended |
Power Supply
Power consumption | 80 W @ 1/8 max power |
Voltage (fuses) |
USA / Canada | 120 V~, 60 Hz (T 6.3 A H 250 V) |
UK / Australia / Europe | 220-240 V~, 50/60 Hz (T 3.15 A H 250 V) |
Korea / China | 220-240 V~, 50/60 Hz (T 3.15 A H 250 V) |
Japan | 100 V~, 50/60 Hz (T 6.3 A H 250 V) |
Enclosure
Dimensions HWD | 525 x 318 x 281 mm (20.7 x 12.5 x 11.1") |
Net weight | 13.7kg (30.2 lbs) |
Construction | 12 mm (½") birch plywood |
Finish | Semi matt white paint |
Grille | Powder coated perforated steel |
Flying hardware | M10 x 8 points; M8 x 1 point |
Accessories
NuQ102-SB swivel bracket for NuQ102 NuQ102-EB extension bracket for NuQ102 NuQ102-FY flying yoke for NuQ102 |
- PC remote control software downloadable at turbosound.com
- 12 mm (1/2") birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- Integral 35 mm pole mount and handles
- Multiple internal rigging points allow bracket mount and suspension in any orientation
- Mains input on Neutrik powerCON* connector
- 10-Year Warranty Program*
- Designed and engineered in the U.K.